Micro View Forms

Context: CH06SR_771

• Cut with fairly steep edges and a rounded bottom. At surface the dimensions are 90 cm (N-S) X 95 cm (E-W) and the depth is 55 cm from the surface of bedrock/slab? The south and west surface of the cut is higher than the north and (even higher than that from the) east.

Context: CH06SR_851

• The dimensions at surface are 108 cm (NE-SW) and 80 cm (NW-SE), though this latter will change, increasing if/when we excavate Area 3 to its depth. The cut reached 85-90 cm in depth and has steep walls with a slightly conical shape. There is a circular cut 35-38 cm in diameter and 12 cm in depth in the bottom of the pit (see context sheet sketch 0850). The bottom of this additional cut is relatively flat.

Context: CH06SR_854

• The dimensions at the surface [of bedrock] of cut are approximately 65 cm (NE-SW) X 65 cm (NW-SE) and 25 cm in depth. The sides are sloping and the shape of the cut is conical. The cut is higher on the N/NW edge and is several centimeters lower on the South edge.

Context: CH06SR_856

• Well formed circular (70 X 70 cm) cut that is approximately 25-30 cm in depth. Eroded bedrock is around the entire edge except for the Western, not coincidently where 0845/0846 was situated. The walls are sloping to heavily sloping, but the bottom is relatively flat.

Context: CH06SR_862

• The cut is 60 cm (NW-SE) X 65 cm (NE-SW) and 25 cm in depth. The walls are steep and the bottom of the cut is uneven.

Context: CH06SR_999